What is it?

This was bought at boot fair the seller knew nothing about it so nothing known about it's origin. It seems to have 2 electrical connectors at the top with wires hanging down to make contact with a sample or something and in the centre there is a probe which can be screwed in and out.




Richard G4ANN

Bletchley Park WWII archive to go online

Millions of documents stored at the World War II code-breaking centre, Bletchley Park, are set to be digitised and made available online.

Electronics company Hewlett-Packard has donated a number of scanners to the centre in Milton Keynes so volunteers can begin the ground-breaking task.

For more info click here

Or here

10 Metres Opens Up For Early Sporadic-E Openings

It would be worth keeping an eye open on the 28MHz band over the next few days. The band was open for some very strong sporadic-E contacts across Eastern Europe as far as OK & SP and down into southern Italy as well as DL and OZ plus south westwards to EA yesterday (13 May) and also today (Friday 14th) from noon until late afternoon.

One notable SSB QSO was with Raphael IM/P- IK0FMB (what a callsign!!) on the little island of Antioco, 20K West of Sardia with an S9+ signal with 400W to a 2-ele home made beam who gave me a 5&7 report with 400W from my windoim antenna.

There were quite a few low power beacons to be heard including IZ8DXB/B in JN70L as far south as Naples and EA4Q in Spain. Stations on 28 MHz were reporting that 6M was also open although when I listened a bit later I heard nothing on my windom.

Lets hope that this early opening is a foretaste of good DX conditions this summer on the HF Bands as the sunspot cycle progresses.

73, de Derek G3GRO

Dayton 2010 day 1

This is the first of a series of mini posts describing the trip to the 2010 Dayton Hamvention. G3VLH, G4ANN, G3LHZ, M0ZAF and myself (G3YSX) traveled out to DAY via Charlotte yesterday. Looking at the various blogs, we did better than many other European hams who tried to go out yesterday, but none the less it was a long haul. We got here, but it seems that those that tried to travel out via Spain found that flight after flight was canceled.

In our case the flight was delayed from 0940 to 1140 due the late arrival of the inbound aircraft, which was in turn caused by an extended flight to dodge the ash. Our flight time increased from 9 hours to 11 hours due to the need to fly north of the volcano to avoid the ash.



From the aircraft we could see the volcano off the port side of the aircraft.

We finally landed at 16.56, 3 hours 20mins later than planned. We were then moved on to the (late) 19.49 flight to DAY in a process that was very smooth by US Airways. We then arrived at Dayton field just as a thunderstorm settled in. A bit of bumpy air and a short hold gave the pilot an opportunity for a slightly expedited landing just as the storm moved to the south of the field.

Getting the hire car was smooth, but navigating the extensive roadworks put our GPS sat nav into a routing loop. We told it to use minor roads only, which did the trick, and finally got to the hotel at 23.30. For me this was a total journey time of 21.5 hours.

Stewart/G3YSX

MTI ATU2000 / STR400

Richard, G4ANN, is looking for information on an Automatic ATU that he is hoping to repair and use on HF. The label says that it is made by (or at least Marketed by) Marine Technology International Ltd. It has markings STR400 and ATU2000 on the cover.

Outside and internal pictures are shown below.

If anyone has any information on this ATU, particularly a circuit diagram and/or a manual of some sort, please can you email (stewart at g3ysx.org.uk), or add a comment on the blog.

Thanks in advance for any help

Stewart/G3YSX

VHF NFD. The Presentation.

They say a picture paints a thousand words. Well here are two pictures that are the result of literally thousands of man hours over several years.

Peter G0VVE and Andy G7FWE clearly capture the mood at the award ceremony held before the RSGB AGM in Bedford this morning.







See you all on the hill at 15:00L on Friday 2nd July.
Or on the air from 14:00Z on Saturday 3rd July.

CARC Spring Surplus Equipment Sale

31st March 2010

Well, we had a reasonable turnout for the Spring Surplus Equipment Sale, and there was quite a wide range of equipment to go under the hammer – signal generators, a nice HP scope, a Dymar 2-tone audio generator, frequency counters, an ERA Morse Reader, a built Howse twin receiver kit, Morse keys, drawers of components, computer stuff and other items too numerous to list. It was also nice to welcome friends from other clubs.

The redoubtable auctioneer and hammer-wielder was Stewart G3YSX, and with Richard G4ANN looking after the financial and admin side of things the evening went without a hitch. And not to forget Ted G4TTY who kept the teas and coffees coming throughout the evening.



Finally, whilst CARC takes as standard a 10 per cent commission on sales we would also like to say a “thank you” to those sellers who donated all the proceeds of their sales to the Club funds – it all helps in these difficult times!

John G3VLH